Astec edge light - Amber

(0)
Write review
 In stock
£15.00

Recommended Additions

  • Model

Description:

AsTec edge light led highlight light board

The Astec Edge light was designed as a lightbar that will fit the wind deflectors of most trucks. The designed length is 130mm and provides 5 groups of 4 0603 edge lit leds. The unit has power tabs at both ends so that the wires can be easily hidden. The unit can be cut to remove 1 or two led sets from the end away from the circuitry and by 1 set at the circuitry end this gives optional lengths of 75, 105 or 130mm.

The unit has a non Chinese voltage regulator for reliability and will operate at full brightness from 5.5 to 12 volts, reduced brightness below 5.5 volts

The unit comes as a handed pair with 6 double sided sticky pads. We suggest painting the rear side and using the pads on the circuit side to mount them.

Although these were primarily designed for wind deflector use their nature and flexibility means that other uses will spring to mind!

Specifications
working voltage: 5.5 to 12 volts at full brightness operating current: 18-20 ma per board Length: 130 mm but can be cut at 105 and 75mm with care

Delivery

We offer just a couple of shipping options, Royal Mail 1st Class tracked, and Courier tracked.

We try to keep the prices of shipping as low as we can, and as a result give you the choice at the check out to which you prefer.

Damages and Non Delivery

You should inspect the products when you receive them for defects or damage. If you take receipt of a defective or damaged item please inform us immediately, in order that we can resolve the matter with minimum delay.

Any items delivered by courier which appear to be damaged must be signed for as such or refused and returned to sender. Non-delivery of an order needs to be reported to us within 7 working days of the date of despatch. Despatch of your order is confirmed by e-mail and this indicates the date of despatch.

Returns

Faulty items will be replaced, unless a prior agreement has been made. All items will be tested before a descision is made.

Anything returned that is non-faulty will be subject to a 20% restocking charge, and exclude shipping costs.

 

 

 

Ship or Collect
Choose from Post, Courier or Click & Collect
Spread Your Payments
Over 3 Months with PayPal Payments
Track your order
Check the current status of your order
  In stock
£624.95
Carson 1/14 scale Low Loader 3 AXLES Trailer
  In stock
£369.95
Tamiya 1:14 scale rc kit of the Knight Hauler US style truck About the Model: The...
  In stock
£364.95
A 3 axle semi trailer bare chassis Made in undercoated and painted steel. This comes...
  In stock
£359.95
A 3 axle 40ft container trailer compatible with Tamiya 1/14th scale trucks This...
  In stock
£349.95
The Ford Aeromax is a scale tractor truck with a realistic ladder frame and a 3-speed...
  In stock
£334.95
A 3 axle 40ft container & trailer compatible with Tamiya 1/14th scale trucks...
  Currently out of Stock
£319.95
A 3 axle 40ft Reefer trailer compatible with Tamiya 1/14th scale trucks This 3-axle...
  In stock
£309.95
Tamiya's model kit of the award-winning truck maker Scanias state-of-the-art R470...
  In stock
£289.95
The Tamiya 56545 Tipper actuator set allows the raising and lowering of the tipper unit...
  Currently out of Stock
£279.95
Support frame with spindle drive SPIN4151 1:14 -tipping drive for Tamiya Arocs 4151...