FZ RC flashing beacon bar OVAL - BLUE

(0)
Write review
 In stock
£8.50

Recommended Additions

  • Model

Description:

A simulated rotating flashing beacon suitable for 1/10th to 1/14th scale cars, trucks and haulers. An Ideal addition to any heavy haulage outfit etc.

BLUE LED flashing beacon bar, oval form, for rc trucks crawlers or cars. You can change the flash sequence either by radio or by the attached miniature poshbutton.

Size is 105mm x18mm x 25mm high.

Quad flashing beacons flash in 7 sequences. The first is a demo sequence and the default display - it runs through all the available sequences except full on and off. This is followed by 4 sequences. these are follwed by an all leds on and then an all leds off. The next sequence after this is the demo sequence. This requires a full channel i.e. changing from 1.2ms to 1.8 ms ( normal full throw)

The base can be removed to lower the height.

Requires 4.8 to 7.2 volt supply so will run directly from a receiver power supply.

Comes with RX futaba type plug.

For the avoidance of confusion a Receiver power supply is one suitable for a Receiver - normally sourced from a BEC in the MFU or ESC or Receiver battery pack. Direct supply from the Main motor will result in failure or short life

square blue beacon bar video here

Delivery

We offer just a couple of shipping options, Royal Mail 1st Class tracked, and Courier tracked.

We try to keep the prices of shipping as low as we can, and as a result give you the choice at the check out to which you prefer.

Damages and Non Delivery

You should inspect the products when you receive them for defects or damage. If you take receipt of a defective or damaged item please inform us immediately, in order that we can resolve the matter with minimum delay.

Any items delivered by courier which appear to be damaged must be signed for as such or refused and returned to sender. Non-delivery of an order needs to be reported to us within 7 working days of the date of despatch. Despatch of your order is confirmed by e-mail and this indicates the date of despatch.

Returns

Faulty items will be replaced, unless a prior agreement has been made. All items will be tested before a descision is made.

Anything returned that is non-faulty will be subject to a 20% restocking charge, and exclude shipping costs.

 

 

 

Ship or Collect
Choose from Post, Courier or Click & Collect
Spread Your Payments
Over 3 Months with PayPal Payments
Track your order
Check the current status of your order
  In stock
£114.95
The MSM-1 is a fully preconfigured sound and light module for RC models....
  Currently out of Stock
£11.95
  In stock
£5.95
New width indicator light at an affordable price! Size 8.1*2.6*3mm. Use 2 m0.8*5mm...